CS – 9809W-T20
Product classification：LED product potting compounds
Product Profile：Product Name: sealing adhesive for LED display
Model: CS & ndash; 9809w-t20
Specification: 22kg / group
Density: A: B (weight ratio) 10:1
Hardness (Shore A): 0-5
Thermal conductivity: 0.2-0.4
Order Hotline： 0755-27103658 Immediate consultation
Usage and precautions:
* because the colloid contains fillers and heat conducting materials, the colloid placed for a long time will be layered and the filler will precipitate. Before use, mix the A / B components evenly, and then put them into the mixing tank according to the mass ratio of 10:1.
* pour the mixed rubber into the device to be potted. Generally, vacuuming is not necessary. If conditions permit, it is recommended to refill after vacuuming. This product is room temperature curing type. The curing speed of adhesive has no great relationship with curing temperature, but has a great relationship with the proportion content of agent B. the larger agent B is, the faster the curing speed is (it is suggested that the adjustment range of agent B is 100:7-100:12). Generally, it takes about 24 hours to cure at room temperature, and more than 72 hours to cure completely.
* Unused rubber materials shall be sealed for storage. The storage period is 6 months (25 ℃). The mixed rubber should be used up once to avoid waste.
* this product is not dangerous, but it is not allowed to enter or eyes.
* transportation: no domestic (cn-gb), International (IMO, IATA, UN) regulations. Non dangerous goods.
&Nbsp; package specification:
* group 22Kg/
&Component a of this product is a white viscous liquid, component B is a yellowish translucent or transparent liquid. The two components can be preserved for a long time before mixing.
&This product has good fluidity, cohesiveness, insulation, elasticity, corrosion resistance and weather resistance. After curing, the colloid can be used in a wide temperature range. During curing, ethanol molecules are released, which will not cause corrosion to PC (poly carbon), PP, ABS, PVC, copper wire and other materials. It has good adhesion to most electronic accessory materials (except PP and PE).
* without shrinkage during curing, it has good waterproof, moisture and anti-aging properties.
&Nbsp; * meet the requirements of EU ROHS directive.